Connecting to a printer – Nortel Networks S4000 User Manual
Page 144
132
Con
n
e
cti
ng t
o
Te
le
vi
sion
s, C
o
mputers and
Pri
n
ters
Connecting to a Printer
Users of PictBridge-compatible (
A 177) printers can connect the camera directly
to the printer and print pictures without using a computer. Follow the procedures
below to print pictures.
B
Note on Power Source
When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
If the AC Adapter EH-62D (available separately) is used, COOLPIX S4000 can be powered from an
electrical outlet. Do not use any other make or model of AC adapter as they may cause the camera to
overheat or malfunction.
B
Note on Direct Printing
To print pictures created in
Draw scene mode (A 69) over a direct camera-to-printer connection,
first create a print order with
Print set (A 94) and then use the DPOF printing option (A 137).
D
Printing Pictures
In addition to printing pictures transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
pictures:
• Inserting a memory card into a DPOF-compatible printer’s card slot
• Taking a memory card to a digital photo lab
For printing using these methods, specify the pictures and the number of prints each to the memory
card using the
Print set option in the playback menu (A 94).
Take pictures
Select pictures for printing and
number of copies using
set option (A 94)
Connect to printer (
Print pictures one at a
time (
Print multiple pictures (
When printing is complete, turn the camera off and disconnect USB cable