Nortel Networks S4000 - Manual (Page 39)

27
Step 1 Turn the Camera On and Select A (Auto) Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
(Auto)
M
o
de
Indicators Displayed in A (Auto) Mode
• Tap A to change the information displayed in the monitor (A 10).
• When the monitor has turned off in standby mode to save power, press the
following button to reactivate it (
A 149).
- Power switch, the shutter-release button, or A button
B
Note on Touch Shutter
At the default setting, the shutter can be released by simply tapping a subject in the monitor
(
A 34). Take care that you do not release the shutter accidently.
D
Functions Available in A (Auto) Mode
• The touch shutter (A 34), touch AF/AE (A 37), or subject tracking (A 40) function can be
enabled.
• The flash mode (A 42) can be adjusted, the self-timer (A 44) and macro mode (A 45) can be
applied.
• Tapping F to specify settings for all shooting menu items (A 47) according to the shooting
conditions.
D
Motion Detection
See
Motion detection (A 146) in the setup menu (A 138) for more information.
D
Electronic Vibration Reduction
When the flash mode ( A 42) is set to W (off) or Y (slow sync) with Electronic VR (A 145) in the
setup menu set to
Auto, the r icon may be displayed in the monitor. When r is displayed, the
effects of camera shake may be pronounced under the current shooting conditions. In these
situations, the camera reduces the effects of camera shake in pictures before recording them.
11 11 11
Shooting mode
A displayed in A (auto)
mode.
Image mode
The combination of image
quality (compression) and
image size is displayed. The
default setting is M 4000×3000. Internal memory indicator
Indicates that images will be stored in the
camera’s internal memory (approximately
45 MB).
When a memory card is inserted in the camera,
C does not appear and images will be stored
on the memory card.
Motion detection icon
The effects of subject
movement and camera
shake are reduced.