Shooting – Nortel Networks S4000 User Manual
Page 181
169
Troubleshooting
T
e
ch
n
ical
No
te
s an
d I
n
de
x
Shooting
Problem
Cause/Solution
A
No picture taken when shutter-
release button is pressed.
• When camera is in playback mode, press the
A button or the shutter-release button.
• When menus are displayed, tap H.
• Battery is exhausted.
• When flash lamp blinks, flash is charging.
Camera cannot focus.
• The intended subject is one with which
autofocus does not perform well.
• Set AF assist in the setup menu to Auto.
• Turn camera off and then on again.
Pictures are blurred.
• Use flash.
• Increase the ISO sensitivity value.
• Enable electronic vibration reduction or
motion detection.
• Use BSS (best shot selector).
• Use tripod and self-timer.
Streaks of light or partial
discoloration are visible in the
monitor.
Smear occurs when extremely bright light
strikes the image sensor. When shooting with
Continuous set to Multi-shot 16 and when
recording movies, avoiding bright objects, such
as the sun, reflections of the sun, and electric
lights is recommended.
Bright specks appear in
pictures taken with flash.
Flash is reflecting off particles in air. Set the flash
mode setting to W (off).
Flash does not fire.
• The flash mode is set to W (off).
• Scene mode with which the flash does not
function is selected.
• On is selected for Blink proof in smart
portrait menu.
• Movie is selected for shooting mode.
• Another function that restricts flash is
enabled.
Optical zoom cannot be used.
Optical zoom cannot be used while recording
movies.