Nortel Networks S4000 - Manual (Page 160)

148
Setup Menu
Basi
c Came
ra Setup
Digital Zoom
Enable or disable digital zoom.
B
Notes on Digital Zoom
• When digital zoom is in effect, AF area mode is set to Center (A 55).
• Digital zoom cannot be used in the following situations.
-
Subject tracking is selected for the touch shooting setting
- When
Scene auto selector, Portrait, or Night portrait is selected in scene mode
- When smart portrait mode is selected
- When
Multi-shot 16 (A 53) is selected
- Just before recording a movie (up to 2× zoom can be activated while recording movies)
Sound Settings
Adjust the following sound settings.
Tap F M z (Setup menu) (A 139) M Digital zoom
On (default setting)
When the camera is zoomed in to the maximum optical zoom position, rotating the
zoom control to
g (i) triggers digital zoom (A 29).
Off
Digital zoom will not be activated (except when shooting movies).
Tap F M z (Setup menu) (A 139) M Sound settings
Button sound
Select
On (default setting) or Off.
When
On is selected, a beep will sound once when operations are completed
successfully, twice when the camera acquires focus on the subject, and three times
when an error is detected. Start-up sound will also play when the camera is turned
on.
Shutter sound
Select
On (default setting) or Off.
No sound is played with shutter release when some features such as continuous
shooting or BSS (best shot selector) are enabled, or when recording movies, even if
On is selected.