Nortel Networks S4000 - Manual (Page 157)

145
Setup Menu
Basi
c Came
ra Setup
B
Notes on Date Imprint
• Imprinted dates form a permanent part of image data and cannot be deleted. The date and time
cannot be imprinted on pictures after they have been taken.
• The date is not imprinted in the following situations:
- Pictures taken in
Panorama assist scene mode
- Movies
• Dates imprinted at an Image mode setting (A 48) of O 640×480 may be difficult to read.
Choose an
Image mode setting of N 1024×768 or larger when using date imprint.
• The date is recorded using the format selected in the setup menu’s Date item (A 22, 141).
C
Date Imprint and Print Set
When printing from DPOF-compatible printers that support the printing of shooting date and photo
information, the date and information can be printed without imprinting this information on them,
using settings in the
Print set option (A 94).
Electronic VR
Choose whether or not electronic VR (vibration reduction) is used when taking still
pictures.
When
Auto is selected, r is displayed in the monitor (A 11), and electronic VR is
applied according to shooting conditions.
Tap F M z (Setup menu) (A 139) M Electronic VR
Auto
Electronic VR is enabled and the effects of camera shake are reduced with shooting
of still pictures when all of the following conditions are met.
• The flash is turned off or set to slow sync mode.
• A slow shutter speed is used.
• The Continuous setting is set to Single.
• The subject is dark.
Off (default setting)
Electronic VR is disabled.