Nortel Networks S4000 - Manual (Page 154)

142
Setup Menu
Basi
c Came
ra Setup
3
Tap
o.
The time zone selection screen is displayed.
4
Tap
C or D to choose the travel destination
time zone and tap I.
If daylight saving time is in effect, tap p to enable
daylight saving time function. W is displayed at the top
of the monitor and the camera clock is advanced one
hour. Tapping p again to disable the daylight saving
time function.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B
Note on the Clock Battery
The camera clock is powered by the clock battery. The clock battery charges when the main battery
is inserted or an AC adapter is connected, and can provide several days of backup power after about
ten hours of charging.
C
w Home Time Zone
• To switch to the home time zone, tap w Home time zone in step 2.
• To change the home time zone, tap w Home time zone in step 2 and complete steps 3 and 4.
C
Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
D
Imprinting Date on Pictures
Enable date imprint from the
Date imprint option (A 144) in the setup menu after the date and
time have been set. When the
Date imprint option is enabled, pictures will be recorded with
shooting date imprinted on them.
Travel
destination
Home time
zone
London, Casablanca
Time zone
15 30 15 05 2010
Tok yo
S eoul
01 30 +10 00