Step 4 - registering your modem, Troubleshooting, Contact information – NetComm IN5699 User Manual

Page 11

Advertising
background image

Rev.2 - YML609

www.netcomm.com.au

InModem56 V.92

Page 11

Step 4 - Registering your Modem

To ensure that the conditions of your warranty are complied with, please go to the
NetComm web site for quick and easy registration of your InModem 56 at

www.netcomm.com.au

Alternatively, you can print out a copy of the Warranty Registration Form and mail it to
NetComm Limited, PO Box 1200, Lane Cove NSW 2066.

Note: You will need to install Adobe Acrobat Reader (refer to the instructions

in “Step 3 - Installing your Software”) before opening the Warranty
Registration Form at “D:\Manuals\Warranty Registration Form.pdf”
where D:\ is the letter of your CD-ROM drive.

Troubleshooting

To un-install your InModem 56 driver:

1. Select “Start” and then “Run”.

2. Type in “LTRemove” and click “OK”.

3. You will be prompted with a warning advising that your are about to remove all your

modem drivers. Select “Yes” to continue.

4. You will be prompted to restart. Select “Yes” or “Restart Now”.

5. Follow the Step 2 - Installing your Driver instructions to reinstall the InModem 56

driver if required.

Contact Information

If you have any technical difficulties with the modem, please do not hesitate to contact
NetComm’s Customer Support Department.

Email:

[email protected]

Fax:

(02) 9424-2010

Web:

www.netcomm.com.au

Advertising