RCA Scenium L50000 - Manual (Page 150)

Chapter 7 Help & Assistance Chapter 7 Help & Assistance
146
POWER
VIDEO AUDIO L R
INPUT1
INPUT2
INPUT3
S-VIDEO AUDIO R
L
Y P B P R
AUDIO OUTPUTS FIXED VARIABLE L R L R
EXT SPEAKERS EXT
INT
L R
+ +
COMPONENT VIDEO INPUT
DIGITAL AUDIO OUT
ANTENNA A IN
ANTENNA B IN
SATELLITE IN
PHONE JACK
ACCESS CARD
Lamp assembly unit
access door
What you’ll need to get started:
___ A flashlight
___ A flat-head screwdriver
___ A lamp replacement unit (part number 252115)
___ The box that the lamp replacement unit came in.
1. Read the precautions listed above.
2. Make sure your hands are dry and clean before you begin replacing the lamp.
3. Unplug the TV’s power cord from the wall outlet (or power strip). Unplug the
power cord from the back of the TV.
4. Put the power cord far away from the TV. Taking this precaution will ensure
that no one plugs in the TV if you walk away from it, or when you’re waiting
for the lamp unit to cool, or when you’re installing the new lamp.
5. Wait 30 minutes so the lamp can thoroughly cool. If you don’t wait at least 30
minutes, you risk getting injured!
6. After 30 minutes, go to the back of the TV set and find the lamp-unit access
door (located in the lower right corner of the TV).
Read the precautions on the
door (you may need a flashlight).
Note: Do not attempt to repair the lamp. Do not open the lamp assembly unit
— leave the lamp in its casing.
Continues on next page...