Chapter 2 connections & setup – RCA Scenium L50000 User Manual
Page 32
Chapter 2 Connections & Setup
Chapter 2 Connections & Setup
28
POWER
VIDEO
AUDIO
L
R
INPUT1
INPUT2
INPUT3
S-VIDEO
AUDIO
R
L
Y
P
B
P
R
AUDIO OUTPUTS
FIXED
VARIABLE
L
R
L
R
EXT SPEAKERS
EXT
INT
L
R
+
+
COMPONENT VIDEO INPUT
DIGITAL
AUDIO OUT
ANTENNA A
IN
ANTENNA B
IN
SATELLITE
IN
PHONE
JACK
ACCESS
CARD
VIDEO
AUDIO
L
R
INPUT1
INPUT2
INPUT3
S-VIDEO
INPUT1
Lets you connect a baseband NTSC (analog) component such as a VCR,
internet access device, DVD player, or laserdisc player.
•
VIDEO provides composite video connection. The video connector is
usually yellow.
•
L AUDIO provides left audio connection. The left audio connector is
usually white.
•
R AUDIO provides right audio connection. The right audio connector is
usually red.
•
S-VIDEO lets you connect an S-Video cable for better video quality picture to a
component with S-Video capability, such as a VCR or DVD player. When using
S-Video, make sure to connect the two audio cables in addition to the S-Video
connector because S-Video carries only the video signal.
INPUT2
Provides connection to a second NTSC (analog) video component such
as a VCR or DVD player. Its jacks are the same as described for INPUT1 above.
INPUT3
Provides connection to a third NTSC (analog) video component, such as
a VCR or DVD player. Its jacks are the same as described for INPUT1 above.