RCA Scenium L50000 - Manual (Page 41)

Chapter 3 The Remote Control Chapter 3 The Remote Control
37
CENTER Used with the LEVEL + and LEVEL – button to adjust the level of the
center speaker of your audio system if you’ve connected one to your TV (you must
press the AUD button first to put the remote in audio mode).
CH +/- Scrolls up or down through the current channel list. Press once to change
the channel up or down; press and hold to continue changing channels. If you’re in
TV mode and press CH+/-, you scroll through TV channels. If you subscribe to
DIRECTV
® programming and the remote is in DIRECTV mode, you scroll through
DIRECTV ® channels.
CH CTRL (Channel control) Used with the PIP feature to control where the
channel is changed (the PIP window or the main picture) when you press the
channel up, channel down, INPUT, or number buttons. You can tell which picture
will be changed by looking at the channel banner (a triangle points to the window
that has channel control).
CLEAR Removes on screen displays from the TV, and from the remote’s display
window. If no displays are present and the skip timer is set, press CLEAR to cancel
the commercial skip timer.
DELAY Increases or decreases the delay between the surround and main speakers
when the receiver is in surround sound mode (you must press the AUD button first
to put the remote in audio mode).
DIRECTV When TV is off, pressing this button turns on the TV and puts it in
DIRECTV mode (DIRECTV on the channel banner will be highlighted). If you
subscribe to DIRECTV
® programming, you must be in DIRECTV mode to view
DIRECTV ® channels.
DSP MODE (Digital Signal Processor Mode) Cycles through the available DSP
modes if you’ve connected a receiver to your TV and your receiver supports this
function (you must press the AUD button first to put the remote in audio mode).
DSP ON•OFF (Digital Signal Processor on and off) Turns the receiver’s digital
signal processor on and off if you’ve connected a receiver to the TV and the
receiver suports this function (you must press the AUD button first to put the remote
in audio mode).
DVD Places the remote control in DVD mode. If you have set up auto tuning,
pressing the DVD button tunes the TV to the correct video input channel.
FORMAT Toggles through screen formats (Normal, Fill, and Full).
Tip: CH + and CH – buttons
In DVD mode, CH +/- will skip chapters on
a disc played by RCA, GE, or PROSCAN
DVD players. For some audio
components, you can press the channel
buttons to skip tracks on a CD.