Connecting the machine, Requirements, 1connecting the machine – Ricoh Printer/Scanner User Manual

Page 11

Advertising
background image

Connecting the Machine

5

1

Connecting the Machine

Reference
For details about connection using
Ethernet, see "Connecting the Net-
work Cable to the Network", Net-
work Guide
.

Requirements

Before using this machine, make sure
all environmental and electrical re-
quirements are met. Connect the ma-
chine to the host computer using the
USB port or network interface unit.
Make sure all cables, connectors, and
electrical outlets necessary for attach-
ing the machine to the host computer
or network are close at hand.

Connecting the machine to the
host using a USB cable

You can connect the machine to the
host computer using a USB cable.
Follow the procedure below to con-
nect the machine to the host computer
using a USB cable.

A

Connect the USB 2.0 cable to the
USB port on the right side of the
machine's back cover.

B

Connect the other end to the USB
port on the host computer.
The machine and computer are
now connected. The printer driver
and TWAIN driver must be in-
stalled next. For details about how
to install the printer driver and
TWAIN driver, see p.8 “Installing
the Printer Driver”
and p.9 “In-
stalling the TWAIN Driver”.

Note

❒ If USB 2.0 is used with Win-

dows 98 SE/Me, only speeds
equivalent to those of USB 1.1
are possible.

ARL008S

Advertising