Ricoh Printer/Scanner - Manual (Page 42)

Troubleshooting
36
5
The Machine Does Not Print
Possible Cause Solutions
Is the power on? Check the cable is securely plugged into the power outlet and the
machine.
Turn on the main power switch.
Is the machine online? If not, press {fOnline} on the control panel.
Does the Printer key stay
red? If so, read the error message on the display and take the required
action.
Is there a warning status or
error message on the dis-
play? If so, read the error message or warning status on the display and
take the required action.
Is the interface cable con-
nected securely to the ma-
chine and computer? Connect the interface cable securely. If it has a fastener, fasten that
securely as well.
See p.5 “Connecting the Machine”“.
Are you using the correct
interface cable? The type of interface cable you should use depends on the compu-
ter. Be sure to use the correct one. If the cable is damaged or worn,
replace it.
See p.5 “Connecting the Machine”.
Was the interface cable
connected after the ma-
chine was turned on? Connect the interface cable before turning on the machine.