Ricoh Printer/Scanner - Manual (Page 26)

Using the Printer Function
20
3
G
Enter the vertical size of the paper
using the number keys, and then
press the {OK} key.
H
Press the {User Tools/Counter} key.
Setting thick paper or OHP
transparencies
Note
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ Paper size settings made using the
printer driver have priority over
those made using the machine's
control panel.
❒ If you are not using the printer
driver to make settings, use the
control panel.
Reference
For printer driver settings, see the
printer driver Help.
A
Press the {User Tools/Counter} key.
B
Select [System Settings] using the
{U} or {T} key, and then press
the {OK} key.
C
Select [Tray Paper Settings] using
the {U} or {T} key, and then
press the {OK} key.
D
Select [Paper Type:Bypass Tray] us-
ing the {U} or {T} key, and then
press the {OK} key.
E
Select [OHP (Transparency)] or [Thick
Paper]
using the {U} or {T} key,
and then press the {OK} key.
F
Press the {User Tools/Counter} key.
Note
❒ Settings remain valid until they
are reset again. After printing
on OHP transparencies or thick
paper, make sure you clear set-
tings for the next user.