Ricoh Printer/Scanner - Manual (Page 36)

Using the TWAIN Scanner Function
30
4
Placing on the Exposure Glass
Originals that do not fit into the AR-
DF, such as sheets with glued-on
parts, books, etc., can be placed di-
rectly on the exposure glass for scan-
ning.
Note
❒ For details about originals that you
can place on the exposure glass,
see Copy Reference.
A
Lift the exposure glass cover or
the ARDF.
Note
❒ Lift the exposure glass cover or
ARDF to an angle of more than
30 degrees. The opening/clos-
ing action triggers the automat-
i c o r i g i n a l s i z e d e t e c t i o n
process.
B
Place the original on the exposure
glass with the side to be scanned
facing down. Align the original
with the back left corner mark.
There are two original orienta-
tions.
❖ When placing the original so that
the top edge touches the rear of
the exposure glass
1. Positioning mark
❖ When placing the original so that
the top edge touches the top left of
the exposure glass
When using the machine as a
network TWAIN scanner, this
orientation is the standard set-
ting for the TWAIN driver. This
orientation is suitable for most
originals.
1. Positioning mark
C
Lower the exposure glass cover or
the ARDF.
D
Select the original orientation ac-
cording to the orientation of the
placed original.
Reference
p.29 “Specifying original orien-
tation and setting originals”
R
ABF007S
R
ABF008S