Roland V-Synth GT - Manual (Page 119)

119
Editing a Tone (Pro Edit)
Com MOD COSM1/2 TVA OSC1/2 AP Syn Effects
This section determines the volume and panning.
TVA stands for Time Variant Amplifier, and controls the overall volume of each note you play, affecting aspects of the
sound such as master volume (level), envelope, keyboard velocity, pan, and tremolo.
fig.06b-55-j.eps_50
TVA
TVA
Parameter Value Description
TVA Switch OFF, ON Switches the TVA on/off.
Level 0–127 Specifies the volume of the tone.
Level KF (Level Keyfollow) -200– +200 Use this parameter if you want the volume of the patch to change according
to the key that is pressed. Relative to the volume at the C4 key (center C),
positive (+) settings will cause the volume to rise for notes higher than C4,
and negative (-) settings will cause the volume to fall for notes higher than
C4. Larger settings will produce greater change.
Level LFO Depth -63– +63 Specifies how deeply the LFO will affect the volume of the patch.
Pan L64–0–63R Specifies the pan of the patch. “L64” is far left, “0” is center, and “63R” is
far right.
Pan KF (Pan Keyfollow) -200– +200 Use this parameter if you want key position to affect panning. Positive (+) set-
tings will cause notes higher than C4 key (center C) to be panned increas-
ingly further toward the right, and negative (-) settings will cause notes higher
than C4 key (center C) to be panned toward the left. Larger settings will pro-
duce greater change.
Pan LFO Depth -63– +63 Specifies how deeply the LFO will affect the pan.
TVA Switch
C4 C3 C2 C1 C5 C6 C7
0
+50
+100
-50
-100
o
L
R
Pan
Key
V-Synth-GT_e.book 119 ページ ２００７年４月９日 月曜日 午後１時４６分