Roland V-Synth GT User Manual

Page 92

Advertising
background image

Com

MOD

COSM1/2

TVA

OSC1/2

AP Syn

Effects

92

Editing a Tone (Pro Edit)

Parameter

Value

Description

Source 1, 2
(Matrix Control Source 1, 2)

Sets the MIDI message used to
change the patch parameter with
the Matrix Control.

OFF

Matrix control will not be used.

CC01–31, 33–95

Controller numbers 1–31, 33–95

BEND

Pitch Bend

AFT

Aftertouch

+PAD-X

Time Trip pad (horizontal direction from the center)

+PAD-Y

Time Trip pad (vertical direction from the center)

PAD-X

Time Trip pad (horizontal direction)

PAD-Y

Time Trip pad (vertical direction)

TRIP-R

Time Trip pad (center from the circumference)

BEAM-L

D Beam controller (left)

BEAM-R

D Beam controller (right)

KNOB1

Assignable Controller ([C1])

KNOB2

Assignable Controller ([C2])

VELO

Velocity (pressure you press a key with)

KEYF

Note Number

Sens 1, 2
(Matrix Control Sens 1, 2)

-63– +63

Sets the amount of the Matrix Control’s effect that is applied. If you
wish to modify the selected parameter in a positive (+) direction –
i.e., a higher value, toward the right, or faster etc. – from its current
setting, select a positive (+) value. If you wish to modify the selected
parameter in a negative (-) direction – i.e., a lower value, toward
the left, or slower etc. – from its current setting, select a negative (-
) value. When both positive and negative are selected, the changes
are greater as the value increases. Set it to “0” if you don’t want
this effect.

Destination 1, 2
(Matrix Control Destination 1, 2)

Specifies the parameters that will
be controlled by the matrix con-
trollers. When not controlling pa-
rameters with the Matrix Control,
set this to “OFF.” Up to two pa-
rameters can be specified for
each Matrix Control, and con-
trolled simultaneously.
For details on each parameter, re-
fer to the corresponding reference
page.

OSC1/2-PITCH

Oscillator Pitch (p. 97, p. 99, p. 102)

OSC1/2-TIME/PW

Time/Pulse Width (p. 97, p. 103)

OSC1/2-FORMA/FAT

Formant/Fat (p. 97, p. 100, p. 104, p. 112)

OSC1/2-LVL

Level (p. 113)

OSC1/2-PENV-ATK

Pitch Envelope Attack Time (p. 121)

OSC1/2-PENV-DCY

Pitch Envelope Decay Time (p. 121)

OSC1/2-PENV-REL

Pitch Envelope Release Time (p. 121)

OSC1/2-TENV-ATK

Time Envelope Attack Time (p. 121)

OSC1/2-TENV-DCY

Time Envelope Decay Time (p. 121)

OSC1/2-TENV-REL

Time Envelope Release Time (p. 121)

OSC1/2-FENV-ATK

Formant Envelope Attack Time (p. 121)

OSC1/2-FENV-DCY

Formant Envelope Decay Time (p. 121)

OSC1/2-FENV-REL

Formant Envelope Release Time (p. 121)

OSC1/2-AENV-ATK

Oscillator TVA Envelope Attack Time (p. 121)

OSC1/2-AENV-DCY

Oscillator TVA Envelope Decay Time (p. 121)

OSC1/2-AENV-REL

Oscillator TVA Envelope Release Time (p. 121)

OSC1/2-LFO-RATE

Oscillator LFO Rate (p. 122)

OSC1/2-LFO-PCH

Oscillator Pitch LFO Depth (p. 102)

OSC1/2-LFO-TM/PW

Time/Pulse Width LFO Depth (p. 103)

OSC1/2-LFO-FR/FT

Formant/Fat LFO Depth (p. 104, p. 112)

OSC1/2-LFO-LVL

Oscillator Level LFO Depth (p. 113)

CSM1/2-PRM1

Refer to “COSM_EffectsList(E).pdf” in the “EFFECTS LIST” folder on
the included CD-ROM.

CSM1/2-PRM2

Refer to “COSM_EffectsList(E).pdf” in the “EFFECTS LIST” folder on
the included CD-ROM.

CSM1/2-ENV1-ATK

COSM Envelope Attack Time (p. 121)

CSM1/2-ENV1-DCY

COSM Envelope Decay Time (p. 121)

CSM1/2-ENV1-REL

COSM Envelope Release Time (p. 121)

V-Synth-GT_e.book 92 ページ 2007年4月9日 月曜日 午後1時46分

Advertising