D beam, S1/s2 switch, D beam s1/s2 switch – Roland V-Synth GT User Manual
Page 67
67
Patch Mode (Editing a Patch)
fig.05-22.eps_50
fig.05-24.eps_50
D Beam
Parameter
Value
Description
D Beam (D Beam Mode)
OFF
The D Beam controller will not be used.
Time Trip
The D Beam controller will control the Time Trip effect (p. 46).
Time
The D Beam controller will control the Time Control effect.
Pitch
The D Beam controller will control the Pitch Control effect.
Assignable
The D Beam controller will control the effect specified for each tone.
For details on how to specify the effect that will be controlled when
“Assignable” is selected, refer to
S1/S2 Switch
Parameter
Value
Description
S1/S2 Switch Setting
Latch
The on/off status will alternate each time you press [S1] [S2].
Momentary
The status will be on only while you hold down [S1] [S2].
V-Synth-GT_e.book 67 ページ ２００７年４月９日 月曜日 午後１時４６分