D beam – Roland V-Synth GT User Manual
Page 210
210
System Mode (Settings Common to All Modes)
fig.08-23.eps_50
D Beam
Parameter
Value
Description
D Beam Local Sw
(V-LINK D Beam Local Switch)
OFF, ON
Specifies whether the D Beam controller will be disconnected from the inter-
nal sound generator in V-LINK mode (OFF) or not disconnected (ON).
1–4 Assign L, R
(V-LINK D Beam1–4 Assign L, R)
Specify the V-LINK function that
will be controlled when you oper-
ate the D Beam controller. Assign
L is the left side, and Assign R is
the right side.
OFF
The D Beam controller will not be used.
PLAYBACK-
SPEED
Playback speed
DISSOLVE-
TIME
Dissolve time (time over which the image switches)
AUDIO LEVEL
Volume during audio playback
COLOR-CB
Color Cb (color-difference signal)
COLOR-CR
Color Cr (color-difference signal)
BRIGHTNESS
Brightness
VFX1
Visual effects 1
VFX2
Visual effects 2
VFX3
Visual effects 3
VFX4
Visual effects 4
OUTPUT-FADE
Output fade
V-Synth-GT_e.book 210 ページ ２００７年４月９日 月曜日 午後１時４６分