Roland KR107 - Manual (Page 112)

112
Chapter 6 User Program Registration
Chapter 6
8.
Touch <Execute>.
The set of User Programs on the external memory is
saved to user memory.
* Never turn off the power or eject the external memory from
the external memory port while the operation is in
progress. Doing so will damage the KR’s internal memory,
making it unusable.
■ Coping Sets of User Programs
Stored in the User Memory to
External Memories
You can take User Program sets saved in user memory and
copy them to external memories.
In this case, in the Copy User Programs screen in Step 4
above, touch the large arrow icon in the center to get the
arrow to point up. This sets the KR to copy the User Program
set in the user memory to the external memory.
The rest of the procedure is identical to that used for copying
sets of User Program set from external memories to user
memory.
Using the Pedal to Switch
User Programs
You can assign the function of the sequential switching of the
“User Programs” to the pedal. That way, each time you
depress the pedal, the KR107 switches to the next User
Program.
Great for use in concerts and similar situations, this allows
you to prepare and save your User Programs in the sequence
they are to be used, and then call up User Programs in the
appropriate order while you perform, simply by depressing
the pedal.
1. Press the [User Program] button.
2. Touch <Pedal> in the lower part of the screen.
A “PEDAL screen” like the following appears.
fig.d-upgopt.eps_50
The Pedal Shift and Load Next settings are stored in each
User Program set.
If you want to use the Load Next function to switch
among User Programs saved to external memory, make
sure to set Load Next in all of the User Program sets to
“On.” Also, be sure to set the Pedal Shift value so it is for
the same pedal.
■ Selecting the Pedal Used for
Switching Settings (Pedal Shift)
3. Touch <Pedal Shift> to select the setting.
Press the [Exit] button to return to the User Program
screen.
■ Sequential Loading of User
Program Sets Stored
(Load Next)
When using the pedal to switch your User Programs,
you can also call up sequential sets of User Programs as
saved to external memory. This feature is called the
“Load Next” function.
3. Touch <Load Next> to select the setting.
Press the [Exit] button to return to the User Program
screen.
Display Explanation
OFF
You can use a function assigned to the
pedal.
Left Pedal
The left pedal is dedicated to switching
User Programs.The function assigned to
the left pedal cannot be used.
Center Pedal
The center pedal is dedicated to
switching User Programs.The function
assigned to the center pedal cannot be
used.
Display Explanation
OFF
Switches Load Next off. The next press of
the pedal after the 36th User Program is
called up returns you to the first User
Program of the same User Program set.
ON
Switches Load Next on. The next press of
the pedal after the 36th User Program has
been called up takes you to the first User
Program in the next User Program set.
KR107_e.book 112 ページ ２００５年８月３日 水曜日 午前９時３６分