Using the remote control, How to use the remote control – Roland KR107 User Manual

Page 71

Advertising
background image

71

Chapter 3 Song Playback

Chapter 3

Using the Remote Control

You can use the included remote control to easily start and stop performances and
switch songs.

How to Use the Remote Control

When using the remote control, aim the remote control at the infrared receiver,
keeping in mind the range of operation (below).

Precautions Concerning Use of the Remote Control

• The remote control is able to transmit only one operation at a time.

• The remote control may not operate even within the range of operation if there

is an obstacle between it and the main unit.

• Using the remote control near other equipment that uses remote control systems

may result in operational errors.

• The life of the battery depends on the amount and conditions of use. If the

operational range of the remote control decreases, change the batteries.

• If you will not be using the remote control for a long period of time, remove the

batteries.

• The remote’s response may suffer if the remote’s sensor is situated under

spotlights or exposed to other such strong lighting.

Refer to “Installing Batteries in

the Remote Control” (p. 18).

Remote Control

Infrared Receiver

Range of operation

Distance:
4 m (approximately 13 feet)

Angle:
40 degrees to the left and right
of the receiver.

Information from the remote is

not received when Remote

Sensor setting is switched off.

Refer to “Switching the

Remote Sensor On and Off (iR

function)” (p. 150).

KR107_e.book 71 ページ 2005年8月3日 水曜日 午前9時36分

Advertising