Restoring the factory settings (factory reset), Assigned to the button (p. 149), Settings (p. 149) – Roland KR107 User Manual

Page 149: Control’s buttons (p. 149)

Advertising
background image

149

Chapter 9 Various Settings

Chapter9

Restoring the Factory Settings
(Factory Reset)

You can return the content stored with “Memory Backup” (p.
148) and the User Programs (p. 108) to their original factory
settings. This operation is referred to as “Factory Reset.”

NOTE

When you perform a Factory Reset, all settings that have been

stored in memory up to then are erased and reset to their

factory defaults.

This operation does not return the touch screen
calibration settings to the original factory condition. To
return the touch screen calibration settings to the
original factory settings, refer to “Returning the Touch
Screen Calibration Settings to the Original Factory
Settings” (p. 151)

When you want to restore the content registered to the
KR’s User memory to the factory condition, refer to
“Formatting the User Memory” (p. 152).

At step 3 in “Procedure” (p. 142), touch “Factory Reset.”

A screen like the one shown below appears.

fig.d-factory.eps_50

Touch <Execute>.

The confirmation message appears on screen.

Touch <OK> to restore the original factory settings.

When you have finished making the settings, switch off the
power, then switch it back on again.

When you touch <Cancel>, the settings are left untouched,
and you’re returned to the previous screen.

NOTE

Never turn off the power while the display indicates

<Executing...>. Doing so will damage the KR’s internal

memory, making it unusable.

Changing the Functions of the
Remote Control’s Buttons

You can change the functions assigned to the remote
control’s buttons.

At step 3 in “Procedure” (p. 142), touch <Remocon Setting>.
A screen like the one shown below appears.

Changing the [

] (PLAY) Button Functions

1.

Touch <PLAY>

to assign functions to

[

] (PLAY) button.

2.

Press the [Exit] button to return to the Functions screen.

Display

Explanation

All Song
Play

Songs are played back continuously in
sequence, starting from the currently
selected song.

Internal Song

Songs in the selected genre are played
back continuously.

“Favorites” Songs

Songs registered to the “Favorites” are
played back in sequence.

Songs on External Memories and
Floppy Disks

Songs within the selected folder are
played back continuously.

One Song
Play

Only the selected song is played back.
Playback stops when the song is finished.

Random
Play

The songs are played back in random
order.

Internal Song

The songs in all genres are played back in
random order.

“Favorites” Songs

Songs registered to the “Favorites” are
played back in random order.

Songs on External Memories and
Floppy Disks

Songs within the selected folder are
played back in random order.

KR107_e.book 149 ページ 2005年8月3日 水曜日 午前9時36分

Advertising