Roland KR107 - Manual (Page 123)

123
Chapter 7 Creating and Editing Songs
Chapter 7
→ ”PC” stands for “Program Change,” which is a command that
tells an instrument to change the sound it’s using. With songs
that rely on the use of a variety of sounds, a “PC” needs to be
located at every point within the song where the Tone is to be
changed
* Some edits can’t be undone, not even by choosing “Undo.” We
recommend saving songs to external memories or to user memory
before editing. For more on how to save songs, refer to “Saving
Songs” (p. 102).
Editing
4.
Touch the item to be edited.
5. Set the value with the dial.
To cancel the operation once it is underway, press the
[Exit] button.
6.
When you’re done making all the settings, touch
<Execute>.
When you are finished editing the setting, return to the
“Song Edit screen.”
Press the [Exit] button to return to the Menu screen.
→ You can play back edited songs by pressing the [ (Play/
Stop)] button in the “Song Edit screen.”
■ Undoing Edits (Undo)
You can cancel an editing operation that you’ve just carried
out. This is handy when you want to undo an edit and
restore data to the way it was before.
* There are some edits that can’t be restored.
At Step 3 of “Selecting the Editing Function” (p. 122), select
<Undo>.
Editing functions that can be undone appear on screen.
fig.d-e-undo.eps_50
If you touch <Cancel>, the undo is cancelled, and you’re
returned to the Song Edit screen.
If you touch <OK>, the confirmation message appears on
screen. Touch <OK> to undone the most recent edit.
■ Copying Measures (Copy)
You can copy a portion of a performance to a different bar in
the same Part or to a measure in another Part. This is handy
when you’re composing a song that repeats a similar phrase.
fig.e-copy.e
At Step 3 of “Selecting the Editing Function” (p. 122), select
<Copy>.
A screen like the one shown below appears.
fig.d-e-copy.eps_50
Item Content
From
Measure number of the first measure of the
segment to be copied
For Number of measures to be copied
Src
Copy-source Track button or part number
Choosing “All” copies all Parts. “- - -” appears
in the <Dst> column.
If you choose a Track, you can only copy to the
selected Track. You cannot copy to the other
Track. “- - -” appears in the <Dst> column.
Dst Copy-destination part number
Mode
Data can be copied in the following three ways:
Replace
If there is a performance recorded at the copy
destination, this previous recording is erased,
and the copied data is written in its place.
Mix
If there is a performance recorded at the copy
destination, the copied data is layered over the
previous recording. If the Tones used for the
copy source and copy destination are different,
the copy-destination Tone is used.
Insert
If there is a performance recorded at the copy
destination, the copied portion is inserted
without erasing the previous recording. The
song is lengthened by the number of inserted
measures.
1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 10
Ex. To copy measures 5–7 to measure 8.
KR107_e.book 123 ページ ２００５年８月３日 水曜日 午前９時３６分