Roland KR107 - Manual (Page 164)

164
Chapter 10 Connecting External Devices
Chapter 10
■ Making the Connections
* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing Sounds from the KR Through the Speakers
on Audio Equipment or Recording Your
Performances on a Recording Device
fig.09-
1.
Turn the volume all the way down on the KR and on
the device you’re about to connect.
2. Turn off the power to the KR and other connected
equipment.
3.
Use audio cables (sold separately) to make the
connection.
4. Switch on the KR.
5. Switch on the connected device.
6. Adjust the volume level on the KR and the connected
device.
Recording KR Performances on a Recording Device
7.
Start recording with the connected device.
8.
Play the keyboard.
9. When the performance ends, stop recording on the
connected equipment.
Playing Audio Equipment Sounds Through the
Speakers on the KR
fig.09-
1. Turn the volume all the way down on the KR and on
the device you’re about to connect.
2.
Turn off the power to the KR and other connected
equipment.
3. Use audio cables (sold separately) to make the
connection.
4.
Turn on the connected equipment.
5.
Turn on the KR.
6.
Adjust the volume level on the KR and the connected
device.
After use, turn off the power using the following procedure.
1.
Turn the volume all the way down on the KR and on
the device you’re about to connect.
2.
Turn off the KR.
3.
Turn off the connected equipment.
Input R/L
(Line In, Aux In)
KR107
Output R/L
(Line Out)
KR107
KR107_e.book 164 ページ ２００５年８月３日 水曜日 午前９時３６分