About the pedals, Adjusting the sound’s volume and brilliance, Connecting headphones – Roland KR107 User Manual

Page 19: Adjusts the overall volume (p. 19), Adjusts the brightness of the sound (p. 19), A set of headphones can be connected here (p. 19), 19 before you start playing

Advertising
background image

19

Before You Start Playing

Before You

Start Playing

To turn the power off, turn the [Volume] knob all the

way to the left, and press the [Power] switch.

The Power indicator at the left front of the KR107 will go
dark, and the power will be turned off.

945

• If you need to turn off the power completely, first turn off the

POWER switch, then unplug the power cord from the power
outlet. Refer to

Power Supply

(p. 6).

About the Pedals

The pedals have the following functions, and are used
mainly for piano performance.

fig.00-08.e

Damper pedal (right pedal)

While this pedal is pressed, notes will be sustained even after
you take your fingers off the keys.

The length of the sustain changes subtly according to the
extent to which the pedal is depressed.

On an acoustic piano, holding down the damper pedal will
allow the remaining strings to resonate in sympathy with the
sounds that you played from the keyboard, adding a rich
resonance.

The KR107 simulates this damper resonance.

You can change the amount of resonance applied with the damper

pedal. Please refer to “[Piano Designer] button” in the Quick Manual.

Sostenuto pedal (center pedal)

This pedal sustains only the sounds of the keys that were
already played when you pressed the pedal.

Soft pedal (left pedal)

When you hold down this pedal and play the keyboard, the
sound will have a softer tone.

The softness of the sound changes subtly depending on the
extent to which the pedal is depressed.

About the Adjuster

When you move the KR107 or if you feel that the pedals are
unstable, adjust the adjuster located below the pedals as
follows.

Rotate the adjuster to lower it so that it is in firm contact
with the floor. If there is a gap between the pedals and
the floor, the pedals may be damaged. In particular

when placing the instrument on carpet, adjust this so
that the pedals firmly contact the floor.

fig.00-09.j

Adjusting the Sound’s

Volume and Brilliance

Turn the [Volume] knob to adjust the overall volume.

Turn the [Brilliance] knob to adjust the brightness of

the sound.

fig.00-07.e

Connecting Headphones

The KR107 has two jacks for plugging in headphones. This
allows two people to listen through headphones
simultaneously, making it very useful for lessons and when
performing piano pieces for four hands. Additionally, this
allows you to play without having to worry about bothering
others around you, even at night.

Plug the headphones into the Phones jack located at the

bottom left of the piano.

Connecting headphones will automatically mute the
sound from the internal speakers.
The headphone volume is adjusted by the [Volume]
knob of the KR107.

fig.00-04.e

NOTE

Use Stereo headphones.

Soft Pedal

Sostenuto Pedal

Damper Pedal

Adjuster

Phones jack x 2

KR107_e.book 19 ページ 2005年8月3日 水曜日 午前9時36分

Advertising