RCA H5401 - Manual (Page 10)

10
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the connector is keyed and can be inserted
only one way.
4. Place the battery pack in recessed area of the handset battery compartment.
5. Close the battery compartment by pushing the door up until it snaps into place.
Connecting the AC (Electrical) Power
Plug the power adaptor cord into the power jack on the back of the recharge cradle
and the other end into an electrical outlet. The charge indicator turns on to indicate
the battery is charging when the handset is on the cradle.
Allow the phone to charge for 14 hours prior to first use. If you do not properly charge
the phone, battery performance is compromised.
CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2776
power adaptor listed in the user’s guide. This power adaptor is intended to be
correctly orientated in a vertical or floor mount position.
Connecting the RF Module
Insert the RF module into the back of the base unit until it snaps into place. The
display will show when the RF module is connected properly.
Connections and Setup