Intercom operation – RCA H5401 User Manual

Page 18

Advertising
background image

1

Battery Low

If the handset battery is low, the unit will emit the alert tone and show BATTERY LOW

in the display to remind you that the battery needs charging. If the battery voltage is

very low, the handset will automatically shut down. Place handset in the charge cradle

to recharge battery.

Paging All Extension from the Cordless Handset

In the standby mode, press the Int/Transfer button and then press zero (0) button

twice to activate page all extensions function.

Paging the Cordless Handset

This feature helps you locate a misplaced handset.
Press the Page button once on the base, then press number 0 button. The cordless

handset will beep continuously (if it is not out of range) for 2 minutes or until you

press any button on the handset.

NOTE: You may still page the cordless handset even if the ringer is turned off.

Intercom Operation

Answering an Intercom Call

1. Press the Int/Transfer button or Talk button.
2. When finished, press the Int/Transfer button or End button again.

Receiving an Incoming Telephone Call During an Intercom Call

During an intercom call, if you receive a telephone call, you will hear an alert tone. To

answer the incoming call, press the Hold button to place your intercom call on hold

or press End or Int/Transfer button to drop the intercom call, then press Talk to answer

the telephone call.

Using Intercom with a Telephone Call

During a telephone call, you can use the intercom function to page another extension

unit and set up a private (2-way) intercom conversation with another user while the

telephone call is placed on hold. Or, you can create a 3-way conversation between the

telephone caller, the cordless handset and other extensions.

Intercom Operation

Advertising