RCA H5401 - Manual (Page 14)

14
Connections and Setup
Regional Code
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until PHONE
SETTING is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons of the sub-menu until REGIONAL CODE is displayed.
4. Press Select/Save button to select
5. Use the number pad to enter your three digit area code. The default is “---“.
6. Press the Select/Save button to store the setting. If you make a mistake, press Delete
to erase input.
Clear All Memory
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until PHONE
SETTING is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons of the sub-menu until CLEAR ALL MEM is displayed.
4. Press Select/Save button to select
5. Use the VOL ( 6 or 5) buttons to select YES.
6. Press the Select/Save button to clear all the records in the phonebook and CID
memories.
Load Default
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until LOAD DEFAULT
is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons to select YES.
4. Press Select/Save button to reset to the default settings.
Set Time
The time cannot be set manually in the handset, only at the base. Any update to the
base time will be automatically sent to the handset.