Other information, Belt clip operation, Display messages – RCA H5401 User Manual
Page 26: Connecting the belt clip
Belt Clip Operation
Connecting the Belt Clip
There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the
ends of the belt clip into place.
Display Messages
The following indicators show the status of a message or of the unit.
LINE ON HOLD:
The line you selected is currently on hold.
LINE IN USE:
The line you selected is currently use by another
extension.
SEARCHING..:
Handset is out of range of the base.
INCOMPLETE DATA:
Caller information has been interrupted during
transmission or the phone line is excessively noisy.
BASE IN USE:
The Base unit is in use, handset is blocked.
SELECT PHONE ID:
Key in the ID of another extension.
DELETE ALL:
Confirm deletion of all Caller ID records.
NEW CALL:
Call has not been reviewed.
NO NUMBER:
No Caller Number was received.
NO NAME:
No Caller Name was received.
NO DATA:
No Caller ID information was received.
BLOCKED CALL:
The person is calling from a number that has been blocked
from transmission.
BLOCKED NAME:
The person’s name is blocked from transmission.
BLOCKED NUMBER:
The person is calling from a number that has been
blocked from transmission.
UNKNOWN CALLER/
The incoming call is from an area not serviced by
NAME/NUMBER:
Caller ID or the
information was not sent.
Other Information