RCA H5401 - Manual (Page 16)

1
1. Press the Format/Redial button.
2. Use the VOL ( 6 or 5) to scroll to the desired number.
3. Press the Talk button to access an available line or select your preferred line;
number is dialed automatically.
Conference Call
This feature allows you to have a 3-way conversation using any combination of 2 lines
(or a line and an intercom call).
To connect and conference:
1. To make a call, select the line you want and dial the number (or make an intercom
call). If you already have someone on the line (or already in intercom call), skip to
Step 2.
2. Press the Hold button to place the call on hold.
3. Select another line and dial another number (or you can make an intercom call if
the call on hold before is not an intercom call).
4. Press the Conf button.
5. Speak to both parties.
NOTE: If you have more than one line (including intercom call) on hold, and you want to
have a conference call, you must first select the line on which you want to conference.
Then, you can select another party when you have pressed the Conf button.
To disconnect one party:
Select the line (by pressing the Line button and then together with the line number)
for the person you want to continue speaking with, and the other party will
automatically disconnected.
To disconnect both parties:
Hang up the handset by pressing the End button.
NOTE: If you press the Hold button to put them on hold first, you may then disconnect
from each party individually.
Volume Adjust
Adjust the receiver volume by pressing the VOL ( 6 or 5) buttons when you are in
talk mode. There are five volume levels, and each press of the VOL ( 6 or 5) buttons
adjusts the receiver volume by one level.
Basic Operation