RCA H5401 - Manual (Page 20)

0
4. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter
is stored in each of the number keys. For example, to enter Bill Smith, press the 2
key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3
times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1
key to insert a space between the first and last name. Press the 7 key 4 times for the
letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter
I; press the 8 key for the letter T; press the 4 key twice for the letter H.
5. Press the Select/Save button again to save your selection.
Storing a Redial Number
1. Make sure the phone is OFF (not in TALK mode).
2. Press the Format/Redial button on the handset to review the redial number.
3. Use the VOL ( 6 or 5) to scroll to the desired number.
4. Press the Conf/Store button and ENTER NAME is displayed.
5. Use keypad to enter the name.
6. Press Select/Save button to save the record.
Inserting a Pause in the Dialing Sequence
Press the #Pause button on the touch-tone pad twice to insert a delay in the dialing
sequence of a stored telephone number when a pause is needed to wait for a dial tone
(for example, after you dial 9 for an outside line, or wait for a computer access tone.)
Each pause counts as 1 digit in the dialing sequence. The letter “P” in the displayed
number indicates a pause.
Reviewing, Changing or Deleting Stored Names/Numbers
To Review: Press DIR/3on the handset, then press the VOL ( 6 or 5) button to scroll
through the stored numbers.
To Change: While viewing the record, press the Select/Save button. Follow Step 2 to 5
under Storing a Name and Number in Memory.
To Delete: Press DIR/3on the handset, then press the VOL ( 6 or 5) button to scroll
to a desired memory.
1. Press the Delete/Mute button. DELETE? is displayed.
2. Press Delete/Mute again to confirm.
Memory