13 for os of microsoft windows 2000/ xp – Rosewill RNX-N400LX User Manual

Page 15

Advertising
background image

Wireless Router

RNX-N400LX User Manual

2. Move mouse and double-click the right button on Network Connections

item. The Network Connections window will appear. Double click Local

Area Connection icon, then User Account Control window shown. Right

click Continue button to set properties.

3. In Local Area Connection Properties window, Choose Networking tab,

move mouse and click Internet Protocol Version 4 (TCP/IPv4), then click

Properties button.

4. Move mouse and click General tab, Select Specify an IP address and type

in values as following example.

IP Address: 192.168.1.1, any IP address within 192.168.1.1 to

192.168.1.253 is good to connect the Wireless LAN Access

Point.

IP Subnet Mask: 255.255.255.0

5. Click OK to complete the IP parameters setting.

2.13 For OS of Microsoft Windows 2000/ XP:

1. Click the Start button and select Settings, then click Control Panel. The

Control Panel window will appear.

2. Move mouse and double-click the right button on Network and Dial-up

Connections icon. Move mouse and double-click the Local Area

Connection icon. The Local Area Connection window will appear. Click

Properties button in the Local Area Connection window.

3. Check the installed list of Network Components. If TCP/IP is not installed,

click the Add button to install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add

button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then

click OK button to install the TCP/IP protocol, it may need the Microsoft

Windows CD to complete the installation. Close and go back to Network

dialog box after the TCP/IP installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

IP Address: 192.168.1.1, any IP address within 192.168.1.1 to

192.168.1.253 is good to connect the Wireless LAN Access

Point.

IP Subnet Mask: 255.255.255.0

8. Click OK to complete the IP parameters setting.

15

Advertising