Rosewill RNX-N400LX - Manual (Page 37)

Wireless Router RNX-N400LX User Manual
Item Description
IP Address Fill in the IP address of LAN interfaces of this WLAN Access Point.
Subnet Mask Fill in the subnet mask of LAN interfaces of this WLAN Access Point.
Default Gateway Fill in the default gateway for LAN interfaces out going data packets.
DHCP
Click to select Disabled, Client or Server in different operation
mode of wireless Access Point.
DHCP Client
Range
Fill in the start IP address and end IP address to allocate a range of
IP addresses; client with DHCP function set will be assigned an IP
address from the range.
Show Client
Click to open the Active DHCP Client Table window that shows the
active clients with their assigned IP address, MAC address and time
expired information. [Server mode only]
Static DHCP
Select enable or disable the Static DHCP function from pull-down
menu. [Server mode only]
Set Static DHCP
Manual setup Static DHCP IP address for specific MAC address.
[Server mode only]
Domain Name
Assign Domain Name and dispatch to DHCP clients. It is optional
field.
802.1d Spanning
Tree
Select enable or disable the IEEE 802.1d Spanning Tree function
from pull-down menu.
Clone MAC
Address
Fill in the MAC address that is the MAC address to be Cloned
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
3.411 Static DHCP Setup
37