Rosewill RNX-N400LX - Manual (Page 6)

Wireless Router RNX-N400LX User Manual
Before We Begin
• Please configure RNX-N400LX with the computer that was last connected directly to
your modem.
• You can only use the Ethernet port on your modem. If you were using the USB
connection before using RNX-N400LX, then you must turn off your modem,
disconnect the USB cable and connect an Ethernet cable to the Internet port on RNX-
N400LX, and then turn the modem back on. In some cases, you may need to call your
ISP to change connection types (USB to Ethernet).
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any
PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or
you will not be able to connect to the Internet.
6