Rosewill RNX-N400LX - Manual (Page 32)

Wireless Router RNX-N400LX User Manual
Authentication
Authentication
RADIUS Server
Set the IP address, port and login password information of
authentication RADIUS sever.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
3.34 Wireless – Access Control
If you enable wireless access control, only those clients whose wireless MAC addresses
are in the access control list will be able to connect to your Access Point. When this
option is enabled, no other wireless clients will be able to connect if the list contains no
entries.
Item Description
Wireless Access
Control Mode
Click the Disabled, Allow Listed or Deny Listed of drop down
menu choose wireless access control mode. This is a security
control function; only those clients registered in the access control
list can link to this WLAN Broadband Router.
MAC Address
Fill in the MAC address of client to register this WLAN Broadband
Router access capability.
Comment Fill in the comment tag for the registered client.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
Current Access
Control List
It shows the registered clients that are allowed to link to this WLAN
Broadband Router.
Delete Selected
Click to delete the selected clients that will be access right removed
from this WLAN Broadband Router.
Delete All Click to delete all the registered clients from the access allowed list.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
32