Rosewill RNX-N400LX User Manual
Page 9
Wireless Router
RNX-N400LX User Manual
Off
RNX-N400LX’s WAN port is not linking
On
RNX-N400LX’s LAN port is linking
Blinking
RNX-N400LX is
sending/receiving data through LAN port
Off
RNX-N400LX’s LAN port is not linking
On
Press Button to start searching
Blinking
RNX-N400LX is sending/receiving data through WAN
Off
Default – No Link
Port/Connector/Button
Description
SMA Antenna Connector
Wireless LAN Antenna connector
Reset
Push continually the reset button 5 ~ 10 seconds to reset
the configuration parameters to factory defaults.
WPS Button
Push the WPS button implementation to reduce the
network configuration steps, and also easy to implement
network security.
LAN 1~4 Ports
The RJ-45 sockets allow LAN connection through
Category 5 cables. Support auto-sensing on 10/100M speed
and half/ full duplex; comply with IEEE 802.3/ 802.3u
respectively.
WAN Port
(Data that going in from
Modem)
The RJ-45 socket allows WAN connection through a
Category 5 cable. Support auto-sensing on 10/100M speed
and half/ full duplex; comply with IEEE 802.3/ 802.3u
respectively.
9