14 for os of microsoft windows 95/ 98/ me, 15 for os of microsoft windows nt – Rosewill RNX-N400LX User Manual

Page 16

Advertising

Wireless Router

RNX-N400LX User Manual

2.14 For OS of Microsoft Windows 95/ 98/ Me:

1. Click the Start button and select Settings, then click Control Panel. The

Control Panel window will appear.

Note:

Windows Me users may not see the Network control panel. If so, select

View all Control Panel options on the left side of the window

2. Move mouse and double-click the right button on Network icon. The

Network window will appear.

3. Check the installed list of Network Components. If TCP/IP is not installed,

click the Add button to install it; otherwise go to step 6.

4. Select Protocol in the Network Component Type dialog box and click Add

button.

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then

click OK button to install the TCP/IP protocol, it may need the Microsoft

Windows CD to complete the installation. Close and go back to Network

dialog box after the TCP/IP installation.

6. Select TCP/IP and click the properties button on the Network dialog box.

7. Select Specify an IP address and type in values as following example.

IP Address: 192.168.1.1, any IP address within 192.168.1.1 to

192.168.1.253 is good to connect the Wireless LAN Access

Point.

IP Subnet Mask: 255.255.255.0

8. Click OK and reboot your PC after completes the IP parameters setting.

2.15 For OS of Microsoft Windows NT:

1. Click the Start button and select Settings, then click Control Panel. The

Control Panel window will appear.

2. Move mouse and double-click the right button on Network icon. The Network

window will appear. Click Protocol tab from the Network window.

3. Check the installed list of Network Protocol window. If TCP/IP is not installed,

click the Add button to install it; otherwise go to step 6.