Regency Sunrise Gas Fireplace L676S-NG1 - Manual (Page 33)

Regency® L676S Direct Vent Gas Fireplace 33
INST
ALLA
TION
INSTALLATION
3) Line up the holes on the left panel with the grommets on the fl oor of
the fi rebox base.
Holes on bottom of
panel.
Grommet on fi rebox
base fl oor.
Left panel.
Use this hole on panel clip.
4) Place panel clip over existing hole in fi rebox. Place one Phillips
screw to secure.
Note: Only use hole closest to back panel to secure panel clip, the panel
clips can be used on either the left or right side.
5) Repeat steps 2-4 to install right side.
2) Locate the 2 holes on the bottom of the left inner panel.