Ricoh Aficio FX200 User Manual

Page 217

Advertising
background image

T

ROUBLESHOOTING

9.14

[No Answer]

The receiving fax

machine has not

answered after several

redial attempts.

Try again. Make sure that the

receiving machine is operational.

No. Not

Assigned

The one-touch or speed

dial location you tried to

use has no number

assigned to it.

Dial the number manually using

the number keypad or assign the

number. For storing a number, see

“Automatic Dialing” on page 7.19.

Invalid Cartridge

Or

No Cartridge

You have used an

unauthorized cartridge.

You must use a approved

cartridge.

No. Not

Available

You have tried to delete

the number for a delayed

fax job.

Verify the number to be deleted

and try again.

Or, delete the number after the

delayed fax job has been sent.

[No Paper]

Add Paper

The paper in the paper

tray has run out.

Load paper in the paper tray. See

page 2.7.

Operation

Not Assigned

You are doing the Add/

Cancel operation, but

there are no jobs

waiting.

Check the display to see if there

are any scheduled jobs. The

display should indicate them in

Standby mode; for example,

Delay Fax.

Paper Jam 0

Open/Close Door

Paper has jammed in the

feeding area of the paper

tray.

Clear the jam. See page 9.5 and

page 9.6.

Paper Jam 1

Open/Close Door

Paper has jammed in the

fuser area.

Clear the jam. See page 9.7.

Paper Jam 2

Check Inside

Paper has jammed in the

paper exit area.

Clear the jam. See page 9.9.

[Power Failure]

Power has turned off

then on and the

machine’s memory has

not been saved.

The job which you were trying to

do before the power failure must

be completely re-done.

Priority Fax

Function Full

The priority fax jobs

queue is full.

Cancel unnecessary priority fax

jobs.

[Retry Redial?]

The machine is waiting

for a specified time

interval to redial a

previously busy station.

You can press Enter to

immediately redial, or Clear/

Stop to cancel the redial

operation.

Display

Meaning

Suggested solutions

Advertising