Ricoh Aficio FX200 - Manual (Page 54)

2
G ETTING S TARTED 2.29
Installing Software for Local Printing
A local printer is a printer directly attached to your computer
using the printer cable, such as a USB or parallel cable. If your
printer is attached to a network, skip this step and see
“Installing Software for Network Printing” on page 2.34.
You can install the printer software using the typical or custom
method.
N OTES :
• Cancel the “New Hardware Found” window when your computer
boots up.
• Make sure that your machine is turned on and connected to your
computer’s parallel port or USB port before installing
software. Windows NT 4.0 do not support the USB connection.
• Printer driver does not support Windows 95.
Typical Installation for local printing
This is recommended for most users. All components (Printer
Driver, Scanner Driver and Printer Settings Utility) necessary for
printer operations will be installed.
1 Make sure that the printer is connected to your computer
and powered on.
2 Insert the supplied CD-ROM into your CD-ROM drive.The
CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\setup.exe, replacing “X” with the letter
which represents your drive and click OK.
3 Click Next.
• If necessary, select a language from the drop-down list.