Roland AT20s - Manual (Page 66)

66
Record and Playback Your Performance
Erasing a Performance Song
If you wish to discard your recording and re-record from the beginning, or if you wish
to record a new performance, you must erase the previously-recorded data.
fig.08-09
1.
Press the [Function] and [Save] buttons simultaneously.
The following message, asking you to confirm your choice, will be displayed.
fig.08-10
To cancel the procedure, press the [Reset] button.
2.
If you are sure that you wish to erase the song, press the [Rec] but-
ton.
1
2
Composer
Demo Load Save Function Registration
Stop Reset Play Rec Fwd Bwd
Select
Clear Rename
Lower Upper Solo Control Accomp Bass Rhythm
Track
AT-20S.e.book 66 ページ ２００３年１１月１０日 月曜日 午後２時３７分