Roland AT20s User Manual
Page 75
75
Record and Playback Your Performance
Re-Recording Part of Your Performance (Punch-in
Recording)
After you have recorded a performance, you can re-record a specified portion of the per-
formance. With this method, you listen to the recorded performance, and re-record just
the desired area. This recording method is called “Punch-in Recording.”
To use Punch-in Recording, you can...
• Turn on the Function menu item “Punch In/Out,” and specify the area that you wish to
re-record.
↓
• Use the Composer to play back the recorded performance, and re-record just a specific
portion.
❍
Specify the Area that You Wish to Re-record
1.
Press the [Function] button.
2.
Press the Select [-] and [+] buttons to select “Punch In/Out.”
fig.08-31
3.
Press the [Rec] button.
4.
Press the [Bwd] / [Fwd] buttons to select “ON.”
fig.08-32
ON
Punch-in Recording
OFF
Normal Recording
5.
Press the [Rec] button.
6.
Press the [Bwd] / [Fwd] buttons to select “from” (the first measure
that you wish to re-record).
fig.08-33
AT-20S.e.book 75 ページ ２００３年１１月１０日 月曜日 午後２時３７分