Roland AT20s - Manual (Page 85)

85
Edit Menu (Editing Song Files)
Erase Recording (Erase Event)
You can erase a specified portion of the performance in a
specified area without making the song shorter. This is called
the “Erase” function.
As an alternative to the method of erasing all performance
data in a specified area, you can erase the following contents
of the performance.
ALL All recording
NOTE Notes played on the keyboard
CONTROL Panel operations (except voice settings),
Part Balance Volume
EXPRESSION Expression pedal recording
VOICE Voice settings
TEMPO Tempo setting
Example: Erasing measures (bars) 5–8
fig.10-10
1. Press the [Function] button.
2. Press the Select [-] [+] buttons to select “Edit
Menu.”
3. Press the [Rec] button.
4. Press the Select [-] [+] buttons to select “Erase
Event.”
fig.10-11
To cancel the operation, press the [Reset] button.
5. Press the [Rec] button.
6. Press the [Bwd]/[Fwd] buttons to select the
data to be erased.
fig.10-12
Settings ALL , NOTE , CONTROL , EXPRESSION ,
VOICE , TEMPO
7. Press the [Rec] button.
8. Press the [Bwd] / [Fwd] buttons to select the
track whose recording you wish to delete.
If you have selected EXPRESSION and TEMPO as the
type of recording to be erased, the Track selection will not
be available because the expression control recording is
common to all tracks.
fig.10-13
Settings: ALL, RHYTHM, ACCOMP, BASS, LOW-
ER, UPPER, SOLO
If you select “ALL”, the recording will be erased from all
tracks.
9. Press the [Rec] button.
10. Press the [Bwd] / [Fwd] buttons to specify
“from” (erase start measure).
11. Press the [Rec] button.
12. Press the [Bwd] / [Fwd] buttons to specify “for”
(number of measures from the erase start mea-
sure).
If you wish to erase to the last measure (bar), set “for:
ALL.”
13. Press the [Rec] button.
The following screen appears.
fig.10-14
To cancel the operation, press the [Reset] button.
14. Press the [Rec] button once again to execute
the Erase function.
When erasure is complete, the basic screen reappears.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
blank measures
AT-20S.e.book 85 ページ ２００３年１１月１０日 月曜日 午後２時３７分