Getting started, Control panel – Ricoh 3045 User Manual
Page 11
5
1. Getting Started
Control Panel
1.
Indicators
Display errors and machine status.
d: Add Staple indicator
D: Add Toner indicator
B: Load Paper indicator
L: Service Call indicator
M: Open Cover indicator
x: Misfeed indicator
See “Control Panel”, General Settings
Guide.
2.
{User Tools/Counter} key
• User Tools
Press to change default settings and
conditions to your requirements.
• Counter
Press to display or print the total
number of copies made.
3.
Display panel
Displays operation status, error messag-
es, and function menus. See p.6 “Display
Panel”.
4.
{Energy Saver} key
Press to switch to the Energy Saver mode.
Note
❒ This key is ineffective during System
Settings (User Tools) operations.
5.
Main power indicator
This indicator lights when the main pow-
er switch is turned on.
Important
❒ Do not turn off the main power
switch while the On indicator is lit
or blinking. Doing so may damage
the hard disk.
6.
On indicator
This indicator lights when the operation
switch is turned on.
7.
Operation switch
Press to turn the power on (the On indi-
cator goes on). Press again to turn the
power off (the On indicator goes off).
8.
{Clear/Stop} key
• Press to cancel the entered data.
• Press to stop printing if the Printer
screen is displayed.
9.
{# (Enter)} key
Press after entering a value.
AJM009S
AdonisC4EN-Printer-F1_FM_forPaper.book Page 5 Friday, May 13, 2005 6:00 PM