Ricoh 3045 - Manual (Page 140)

Printer Features
134
5
PS Menu
This menu appears only when the op-
tional PostScript 3 unit is installed.
❖ Data Format
You can select a data format.
• Binary Data
• TBCP
Limitation
❒ This setting is not effective when
operating the machine with a
parallel or EtherTalk connection.
❒ When operating the machine with
a parallel connection, and also if
the binary data is sent from the
printer driver, the print job is can-
celed.
❒ When operating the machine with
an Ethernet connection, the print
job is canceled under the follow-
ing conditions;
• The printer driver data for-
mat is TBCP, and the data
format selected on the dis-
play panel is Binary Data.
• The printer driver data for-
mat is binary, and the data
format selected on the dis-
play panel is TBCP.
Note
❒ Default: TBCP
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
PDF Menu
This menu appears only when the op-
tional PostScript 3 Unit is installed.
❖ Change PDF Password
Set the password for the PDF file
executing PDF Direct Print.
• Current Password
• New Password
• Confirm New Password
A password can be set using on the
Web Image Monitor, but in this case
the password information is sent
through the network. If security is a
priority, set the password using this
menu from the Control Panel.
Note
❒ Default: Not Set
❖ PDF Group Password
Set the group password already
specified with DeskTopBinder
Lite.
• Current Password
• New Password
• Confirm New Password
A password can be set using on the
Web Image Monitor, but in this
case the password information is
sent through the network. If secu-
rity is a priority, set the password
using this menu from the Control
Panel.
Note
❒ Default: Not Set
❖ Resolution
You can set the print resolution in
dots per inch.
• 300 dpi
• 600 dpi
Note
❒ Default: 600 dpi
AdonisC4EN-Printer-F1_FM_forPaper.book Page 134 Friday, May 13, 2005 6:00 PM