Ricoh 3045 - Manual (Page 62)

Preparing the Machine
56
2
If Bidirectional Communication Is Disabled
Set up option settings when bidirectional communications are disabled.
Limitation
❒ Under Windows 2000 / XP and Windows Server 2003, Manage Printers per-
mission is required to change the printer properties in the [Printers] folder.
Log on as an Administrators or Power Users group member.
❒ Under Windows NT 4.0, Full Control permission is required to change the
printer properties in the [Printers] folder. Log on as an Administrators or Pow-
er Users group member.
A
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
B
Click the icon of the printer you want to use.
C
On the [File] menu, click [Properties].
D
Click the [Accessories] tab.
If options in the [Change Accessories] tab are disabled, bidirectional connection
is enabled. In this case, no change is necessary for option settings.
Note
❒ If you are using the RPCS printer driver, click the [Change Accessories] tab.
E
Select options installed from the [Options] area, and then make the neces-
sary settings.
F
Select the total amount of the memory in [Total memory:] when the optional
SDRAM module is added.
G
Under [Paper source tray settings:], click and highlight the tray to be used, and
then select the appropriate size, position, and type for the tray. Select the
[Do not use Auto Tray Select]
check box to exclude the tray from the targets of
automatic tray selection.
H
Click [OK] to close the printer properties dialog box.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 56 Friday, May 13, 2005 6:00 PM