Ricoh 3045 User Manual
Page 159
Troubleshooting
153
8
Problem
Solutions
Is the Data In indicator
blinking or lit after starting
the print job?
If not, data is not being sent to the machine.
❖ When the machine is connected to the computer using
the interface cable
Check the machine port settings are correct. For parallel port
connection, port LPT1 or LPT2 should be set.
• Windows 95 / 98 / Me
A
Click the [Start] button, point to [Settings], and then click
[Printers]
.
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Details] tab.
D
In the [Print to the following port:] list, confirm the correct
port is selected.
• Windows 2000, Windows NT 4.0
A
Click the [Start] button, point to [Settings], and then click
[Printers]
.
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows XP
A
Click the [Start] button, and then click [Printers and Faxes].
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows Server 2003
A
Click the [Start] button, point to [Settings], and then click
[Printers and Faxes]
.
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
❖ Network connection
Contact your network administrator.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 153 Friday, May 13, 2005 6:00 PM