Ricoh 3045 - Manual (Page 90)

Other Print Operations
84
4
Sample Print
Use this function to print only the first
set of a multiple-set print job. After
you have checked the result, remain-
ing sets can be printed or canceled us-
ing the machine's control panel. This
can reduce misprints due to mistakes
in content or settings.
Limitation
❒ A Sample Print file cannot be stored
if:
• the total number of Sample Print,
Locked Print, Hold Print, and
Stored Print files in the machine is
over 100. (The maximum number
varies depending on the volume
of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the machine
contain over 9,000 pages in total.
Note
❒ If a Sample Print file has not been
stored properly, check the error
log on the control panel (see p.104
“Checking the Error Log”).
❒ Even after you turn off the ma-
chine, stored documents in the ma-
chine remain. However, the [Auto
Delete Temporary Print Jobs]
or [Auto
Delete Stored Print Jobs] settings are
applied first (see p.128 “System”).
❒ If the application has a collate op-
tion, make sure it is not selected
before sending a print job. By de-
fault, Sample Print jobs are auto-
matically collated by the printer
driver. If a collate option is select-
ed from the application's [Print] di-
a l o g b o x , m o r e p r i n t s t h a n
intended may be produced.
❒ If the first set of the Sample Print
files is not as you expected and you
do not want to print remaining
sets, delete the Sample Print file
using the display panel. If you
print the remaining sets of the
Sample Print file, the job in the ma-
chine is deleted automatically.
Printing a Sample Print File
The following procedure describes how
to print a Sample Print file with the PCL
6 / 5e and the RPCS printer driver. For
information about how to print a Sam-
ple Print file with the PostScript 3 printer
driver, see PostScript 3 Supplement in-
cluded as a PDF file on the CD-ROM.
Limitation
❒ Applications with their own driv-
ers, such as PageMaker, do not
support this function.
❒ If you are using Mac OS X, you need
Mac OS X v10.2 or higher to use this
function.
Note
❒ The following procedure describes
when you select [Complete List]
from [Initial Print Job List] (see p.80
“Selecting the Initial Print Job
List”).
A
Configure Sample Print in the
printer driver's properties.
Reference
For details about configuring
the printer drivers, see the rele-
vant Help files.
AdonisC4EN-Printer-F1_FM_forPaper.book Page 84 Friday, May 13, 2005 6:00 PM