Sending files to a shared network folder, Entering the path to the destination manually – Ricoh Aficio MP 1100 User Manual

Page 52

Advertising
background image

Sending Scan Files by Scan to Folder

44

2

Sending Files to a Shared Network Folder

This section explains how to specify the destination when sending files to a
shared network folder.

Important

❒ You must create a shared folder on the client computer in advance. You can

create the shared folder under Windows98/Me/2000/XP, WindowsNT4.0,
Windows Server 2003, and Mac OS X.

❒ Depending on the operating system of the client computer, access to the

shared folder may require authentication.

You can send a file to a shared folder over the network by any of the following
methods:
• Enter the path to the destination directly
• Specify the path by browsing the network for the destination

Entering the path to the destination manually

You can enter the path to the destination folder manually.

A

Press [Enter Destination].

B

Press [SMB].

C

Press [Manual Input] on the right side of the path field.
The soft keyboard appears.

D

Enter the path for the folder.
The following is an example of a path where the folder name is "user" and the
computer name is "desk01": \\desk01\user.
Instead of specifying the destination using its path, you can also use its IP ad-
dress.
For details about maximum number of characters that can be entered, see
"Folder transmission".

E

Press [OK].

Advertising
This manual is related to the following products: