Ricoh Aficio MP 1100 User Manual

Page 59

Advertising
background image

Specifying Scan to Folder Destinations

51

2

E

Enter the path for the folder.
If you set the connection type to [NDS], the NDS tree name is "tree", the name
of the context including the volume is "context", the volume name is "vol-
ume", and the folder name is "folder", the path will be \\tree\volume.con-
text\folder".
If you set the connection type to [Bindery], the NetWare Bindery server name
is "server", the volume name is "volume", and the folder name is "folder", the
path will be "\\server\volume\folder".
For details about maximum number of characters that can be entered, see
"Folder transmission".

F

Press [OK].

G

Enter the user name for logging on to the NDS tree or NetWare Bindery
server.
Press [Manual Input] on the right side of the user name field. The soft keyboard
appears.
If you press [NDS] for [Connection Type], enter the user name, and then enter
the name of the context containing the user object. If the user name is "user"
and the name of the Context is "context", the user name will be "user.context".

H

If a password is specified for the logon user, enter it.
Press [Manual Input] for [Password] to display the soft keyboard.

I

Press [Connection Test].
A connection test is performed to check whether the specified share folder ex-
ists.

J

Check the connection test result, and then press [Exit].

K

Press [OK].

Note

❒ If you change the protocol after entering the path name, user name, or

password, a confirmation message appears.

❒ To change the path for the folder that has been entered, press [Change] on

the left side of the destination field. Enter the correct path for the folder,
and then press [OK].

❒ You can connect only to folders that you have the read privileges for.
❒ The connection test may take time.
❒ You may not be able to press [Connection Test] right after pressing [Cancel]

during a connection test.

❒ Even if the connection test was successful, the machine may fail to transfer

the file if you do not have write privileges for the file or there is not enough
free hard disk space.

Advertising
This manual is related to the following products: