Turning off the power, Adjusting the sound’s volume and brilliance, Connecting headphones – Roland FP-5 User Manual

Page 10: Adjusts the overall volume level (p. 10), Adjusts the tone brightness (p. 10)

Advertising
background image

10

Before You Play

Turning Off the Power

1.

Before switching the power off, turn the volume
all the way down by rotating the [Volume] knob.

fig.00-05

2.

Press the [Power] switch on the back of the unit.

The power is switched off.

fig.00-07

Adjusting the Sound’s

Volume and Brilliance

fig.00-08

1.

Use the [Volume] knob to adjust the overall
volume level.

Rotating the knob clockwise increases the volume;

counterclockwise rotation decreases it.

2.

Use the [Brilliance] knob to adjust the overall
sound quality.

Rotating the knob clockwise makes the tone brighter;

rotating it counterclockwise makes the sound more

subdued.

If the FP-5 is positioned against a wall, you will probably

want to rotate the knob more to the left.

Connecting Headphones

Connecting headphones allows you to enjoy playing

anytime, even at night, without concern.

* Headphones are not included. Consult your Roland dealer if

you want to purchase.

fig.00-09

1.

Plug the headphones into the Phones jack at the
front, on the left side of the piano.

Use the [Volume] knob on the FP-5 to adjust the volume

of the headphones.

* Make sure to use stereo headphones.

Some Notes on Using Headphones

• To prevent damage to the cord, handle the headphones

only by the headset or the plug.

• The headphones may be damaged if the volume is too

high when they are plugged in. Lower the volume on the
FP-5 before plugging in the headphones.

• To prevent possible auditory damage, loss of hearing, or

damage to the headphones, the headphones should not
be used at an excessively high volume. Use the
headphones at a moderate volume level.

Rear Panel

OFF

Upper Position

FP-5_e.book 10 ページ 2005年1月26日 水曜日 午前10時22分

Advertising